|
Type: |
MBBR06 |
|
Size: |
Φ16*10mm |
|
Hole: |
6rooms |
|
Surface Area: |
800m2/m3 |
|
Porosity: |
85% |
|
Material: |
HDPE |
MBBR Filter Media For Aquarium
Product describe:
The use of biofilm systems in wastewater treatment is being increased rapidly because of its tempting approach of pollutant removal from wastewater, which has been proved to be effective in terms of both cost and environmental perspectives . Biofilm can have both positive and negative effects in treatment processes depending on the type of treatment concept applied. Processes such as a moving bed biofilm reactor (MBBR) depend on biofilm development, while it can cause problems in membrane bioreactor (MBR) through membrane biofouling. Those processes taking advantage of biofilms have been widely used for the removal of organic and inorganic matters from different wastewaters , by mechanisms such as biodegradation, bioaccumulation, biosorption, biomineralization, and bio-immobilization There are several benefits of using biofilm system in wastewater treatment, as compared to suspended growth system (activated sludge for example), such as flexible procedures, smaller space demand, lower hydraulic retention time, increased resilience to changes in the environment, higher biomass retaining period, high active biomass concentration, as well as low sludge production]. The use of biofilm systems also enhances the control of reaction rate and population mechanisms.
Product Advantage:
Minimum Area required
Less manual intervention
Nominal price
Easy to handle and Easy to stabilize
Minimum sludge production
Lower sludge production
High efficiency and performance
Bod and Cod reduced to greater extend













